Cleanroom and hospital pharmacy training
BPP & PIC/S PE 010.
Sixteen complementary modules for production, quality and maintenance teams and hospital pharmacies (PUI): cleanroom principles, behaviour, facility qualification, cleaning, environmental monitoring, isolators, particle sampling and microbiological sampling. Programmes address French Good Preparation Practices (BPP), PIC/S PE 010 and GMP. In-house or open-course arrangements depend on the module; modules marked with an asterisk are offered and organised by ASPEC.
- Modules
- 16
- Total duration
- 68 h
- Standards and guidance
- BPP · PIC/S · GMP
WL experience in motion
Where others advise, we take control!
Introduction (cleanrooms and contamination control)
Target audience
Production managers, industrial and hospital pharmacists, project officers, biologists, hospital pharmacy technicians, embryologists, cleanroom and equipment users, GMP QA managers and assistants, technical and maintenance services, cleaning personnel, anyone involved with cleanrooms.
Prerequisites
None
Learning objectives
- Know and understand the general principles of a cleanroom.
- Know and understand the documents applicable to cleanrooms.
Syllabus
- 1Scope
- 2Historical development: from “white rooms” to cleanrooms
- 3Cleanliness grades A, B, C and D and their relationship with ISO 14644
- 4Definitions and terminology
- 5Interrelationships between standards, guidance and regulations
- 6Overview of the training modules
Cleanroom quality management (GMP / PIC/S)
Target audience
Production managers, industrial and hospital pharmacists, biologists, hospital pharmacy technicians, cleanroom and equipment users, GMP QA managers and assistants, CQV managers.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Know and master the application of quality tools in the PIC/S framework.
- Interpret French Good Preparation Practices (BPP) and PIC/S PE 010 and understand the quality requirements.
- Know how to manage and control quality events (deviations, out-of-specification results, changes).
Syllabus
- 1Key quality management concepts
- 2History, definitions and objectives
- 3Resources, tools and benefits
- 4The documentation system
- 5Traceability
- 6Management of OOS, OOE and OOT results and deviations
- 7Change control
- 8Impact of the CCS (GMP Annex 1, 2022)
Validation, qualification and monitoring: the three fundamental pillars of GMP
Target audience
Production managers, industrial and hospital pharmacists, biologists, hospital pharmacy technicians, cleanroom and equipment users, GMP QA managers and assistants, CQV managers.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Interpret French Good Preparation Practices (BPP) and PIC/S PE 010 and understand the qualification and validation requirements.
- Know how to interpret inspectors’ questions on these topics.
- Know and understand the distinction between qualification and validation.
- Know how to carry out qualification using a V-model approach.
Syllabus
- 1Definitions and explanations
- 2Differences, complementarity and interrelationships
- 3The V-model approach: from URS through DQ, IQ, OQ and PQ
- 4Areas covered
- 5The CCS (Contamination Control Strategy) approach in the new GMP Annex 1 (2022)
Risk assessment: an essential way of thinking
Target audience
Production managers, industrial and hospital pharmacists, biologists, hospital pharmacy technicians, cleanroom and equipment users, GMP QA managers and assistants, CQV managers.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Interpret French Good Preparation Practices (BPP) and PIC/S PE 010 and understand the risk assessment requirements.
- Master the FMEA tool and know how to carry out a risk assessment.
Syllabus
- 1Document structure
- 2Underlying principles of the document
- 3The FMEA tool: how to use it
- 4Sterile, non-sterile and radiopharmaceutical preparations
- 5Points to consider: quality assurance system, personnel, premises and equipment, documentation, production, quality control, outsourced activities, complaints and recalls, internal audits
Cleanroom equipment: essential and critical
Target audience
Production managers, industrial and hospital pharmacists, biologists, hospital pharmacy technicians, cleanroom and equipment users, GMP QA managers and assistants, CQV managers, technical and maintenance managers.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Know and understand the different types of laboratory equipment and how to select them appropriately for each need.
- Learn to scrutinise equipment selection criteria.
- Know how to use each item of equipment in accordance with applicable good practices.
Syllabus
- 1Introduction and definitions
- 2Laminar airflow (LAF) units, microbiological safety cabinets, isolators, robots, autoclaves, restricted access barrier systems (RABS)…
- 3Standards and regulatory context
- 4Flows of consumables and equipment into sterile product production / preparation
- 5Areas involving toxic and/or hazardous substances
- 6Advantages and disadvantages of each type of equipment
- 7Operator behaviour and good practices
Target audience
Production managers, industrial and hospital pharmacists, biologists, hospital pharmacy technicians, cleanroom and equipment users, GMP QA managers and assistants, CQV managers, technical and maintenance managers.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Interpret and understand the requirements of French Good Preparation Practices (BPP) and PIC/S PE 010 for premises qualification.
- Know how to independently draw up a premises qualification plan (IQ, OQ and PQ).
- Understand and master all specific aspects of the tests required for premises qualification.
Syllabus
- 1Introduction and definitions
- 2Review of applicable standards and regulatory requirements
- 3Required outcomes: particle cleanliness class and microbiological cleanliness class
- 4Required control measures: air velocities, air change rate, differential pressure, air filtration
- 5Factors influencing results
- 6Areas involving toxic and/or hazardous substances
- 7Integration of data into the documentation system and the CCS (GMP Annex 1, 2022)
Quality assurance of results under GMP / PIC/S
Target audience
Production managers, industrial and hospital pharmacists, biologists, hospital pharmacy technicians, cleanroom and equipment users, GMP QA managers and assistants, CQV managers, QC managers.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Know and understand the specific aspects of measurement (metrology).
- Know how to select contractors confidently using robust quality criteria.
- Master the quality aspects of a result (influencing factors).
- Know how to qualify service providers and contractors according to their criticality.
Syllabus
- 1Fundamental principles of metrology
- 2Impact on test, calibration and analytical results
- 3How to select a testing, calibration and analytical laboratory appropriately
- 4Importance of the measurement chain when calibrating a monitoring system
- 5Within the department or outsourced?
- 6How to ensure the quality of outsourced activities
- 7Review of GMP and PIC/S requirements (supplier audits)
- 8Responsibilities relating to results from outsourced activities
Target audience
Production managers, industrial and hospital pharmacists, biologists, hospital pharmacy technicians, cleanroom and equipment users, GMP QA managers and assistants, CQV managers, technical and maintenance managers, cleaning personnel.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Interpret and master the requirements of French Good Preparation Practices (BPP) and PIC/S PE 010 for personnel qualification.
- Know the specific characteristics of cleanroom clothing and how to select clothing suited to the process.
- Understand and know how to apply good cleanroom behaviour practices (gowning, hygiene, working practices…).
Syllabus
- 1Personnel qualification: aseptic process simulation (media fill test, MFT)
- 2Selection of clothing, frequency of changing, laundering…
- 3Gowning, handwashing (practical exercise), interlocking and control of personnel flows, wearing sterile gloves…
- 4Review of regulatory texts and standards
- 5Specific case of hospital pharmacies (PIC/S) and their constraints
Target audience
Production managers, industrial and hospital pharmacists, biologists, hospital pharmacy technicians, cleanroom and equipment users, GMP QA managers and assistants, CQV managers, technical and maintenance managers, cleaning personnel.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Establish and control your own cleaning and disinfection processes.
- Know and apply good cleanroom cleaning practices.
- Interpret and master the requirements of French Good Preparation Practices (BPP) and PIC/S PE 010 for cleaning and disinfection validation.
- Know how to set up and carry out cleaning and disinfection validation independently.
Syllabus
- 1Standards and regulations
- 2Materials, equipment and level of finish for each cleanliness class
- 3Surface contamination (biofilms, cleaning, disinfection…)
- 4Selection of products (qualification and efficacy: spectrum of activity)
- 5Methods and procedures (cleaning plan)
- 6Practical exercise on techniques
- 7Associated checks: surface quality performance testing and validation of the effectiveness of cleaning and disinfection methods
Temperature control and verification of controlled-environment chambers
Target audience
Production managers, industrial and hospital pharmacists, biologists, hospital pharmacy technicians, cleanroom and equipment users, GMP QA managers and assistants, CQV managers, QC managers.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Know and master the specific characteristics of chambers and units (refrigerators, incubators, washer-disinfectors, autoclaves).
- Understand the applicable standards and the tests to be performed.
- Interpret and understand PIC/S requirements for chambers.
- Know how to define and implement a chamber qualification plan (IQ, OQ and PQ).
Syllabus
- 1Chamber mapping and ISO 15189
- 2Sensor systems (monitoring) and how they complement mapping
- 3Risk assessment as a tool for selecting equipment, type of verification, frequency…
- 4Practical case study and the specific case of autoclaves
Target audience
Production managers, industrial and hospital pharmacists, biologists, hospital pharmacy technicians, cleanroom and equipment users, GMP QA managers and assistants, CQV managers, QC managers, technical and maintenance managers.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Interpret and understand the requirements of French Good Preparation Practices (BPP) and PIC/S PE 010 for monitoring.
- Understand the different monitoring solutions (IoT or manual).
- Know how to define and implement EMS qualification (IQ, OQ and PQ).
- Know how to define a microbiological monitoring plan.
Syllabus
- 1Definition, role and objectives
- 2Review of regulatory texts and standards
- 3Scope of an EMS: sensors? Manual data entry? Integration of microbiology?
- 4The EMS as a monitoring tool: thresholds, levels, alarms…
- 5Integration into the quality assurance system
- 6Impact of the new GMP Annex 1 (2022) and the CCS: the EMS as an integral part of a holistic approach to contamination control
- 7Specific case of hospital pharmacies (PIC/S) and their constraints
Computerised systems and GMP / PIC/S
Target audience
Production managers, industrial and hospital pharmacists, biologists, hospital pharmacy technicians, cleanroom and equipment users, GMP QA managers and assistants, CQV managers, QC managers, technical and maintenance managers.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Interpret and understand the requirements of French Good Preparation Practices (BPP) and PIC/S PE 010 for computerised systems and their validation.
- Know the regulatory aspects relating to data.
- Understand the different software solutions.
- Know how to define and implement computerised system validation (CSV).
Syllabus
- 1Definition of a computerised system, its role and objectives
- 2Review of regulatory texts and standards
- 3Scope of computerised systems
- 4The software supplier’s perspective: GAMP 5
- 5Regulatory requirements: 21 CFR Part 11 (FDA) and GMP Annex 11
- 6Specific case of hospital pharmacies (PIC/S) and their constraints
Target audience
Production managers, industrial and hospital pharmacists, project officers, biologists, hospital pharmacy technicians, embryologists, cleanroom and equipment users, GMP QA managers and assistants.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Master the specific and critical aspects of isolators in terms of their impact on the aseptic preparation of medicinal products.
- Know how to carry out full isolator qualification (IQ, OQ and PQ).
- Know how to identify and resolve deviations from the requirements of French Good Preparation Practices (BPP) and PIC/S PE 010.
Syllabus
- 1Isolators from A to Z
- 2Different types of accessories and configurations
- 3Isolator qualification: how to carry it out
- 4Typical qualification errors
- 5“Normal” use of an isolator
- 6Specific case of emergency procedures
The QC laboratory at the heart of GMP / PIC/S requirements
Target audience
Production managers, industrial and hospital pharmacists, project officers, biologists, hospital pharmacy technicians, embryologists, cleanroom and equipment users, GMP QA managers and assistants.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Understand and interpret the requirements of French Good Preparation Practices (BPP) and PIC/S PE 010 in relation to the tests and results provided by the QC laboratory.
- Ensure control of the quality of QC processes.
Syllabus
- 1Review of regulations
- 2In-house or outsourced?
- 3Contractor selection criteria and points to consider: is an audit required?
- 4Selection of consumables and control of starting materials
- 5Relationship with the Pharmacopoeia
- 6Scope of the QC laboratory: analysis of environmental samples
- 7Finished product testing (sterility, bioburden, endotoxins, applicability to hospital pharmacies)
- 8Hospital pharmacies — Royal Decree of 30 September 2020: the specific case of outsourcing to the hospital laboratory
- 9Integration of data into the CCS approach (GMP Annex 1, 2022)
Target audience
Production managers, industrial and hospital pharmacists, project officers, biologists, hospital pharmacy technicians, embryologists, cleanroom and equipment users, GMP QA managers and assistants.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Know and understand the context of particle testing.
- Apply good practices for particle testing.
Syllabus
- 1Review of standards and regulatory texts
- 2Method, instrument and documentation system (protocols)
- 3Differences between qualification and monitoring: objectives, sampling plan, frequencies and instruments (fixed or portable, continuous or periodic according to grade and risk)
- 4Risk assessment of the sampling plan
- 5Complementarity with the EMS and microbiological results
- 6Importance of results visualisation and data processing
- 7Demonstration and practical exercise
- 8Manual or digital recording sheet?
Target audience
Production managers, industrial and hospital pharmacists, project officers, biologists, hospital pharmacy technicians, embryologists, cleanroom and equipment users, GMP QA managers and assistants.
Prerequisites
Have completed “The cleanroom from A to Z — Module A” or be familiar with the principles of cleanrooms.
Learning objectives
- Know and understand the context of environmental microbiological testing.
- Distinguish between the roles of microbiological sampling for qualification and for monitoring.
- Apply good practices for environmental microbiological testing.
Syllabus
- 1Review of standards and regulatory texts
- 2Method, instrument and documentation system (protocols)
- 3Difference between qualification and monitoring
- 4Aseptic practice, sampling risks, transport and analysis
- 5Risk assessment of the sampling plan
- 6Complementarity with the EMS and particle results
- 7Importance of results visualisation and data processing
- 8Demonstration and practical exercise
- 9Manual or digital recording sheet?
* These training modules are offered and organised by ASPEC.
Build your training programme
Tony Wattrelot and Pauline Legrand combine modules to suit your processes, teams and inspection timelines.
